Wednesday, December 19, 2012

Paper waste used to make bricks

Dec. 19, 2012 ? Researchers at the University of Jaen (Spain) have mixed waste from the paper industry with ceramic material used in the construction industry. The result is a brick that has low thermal conductivity meaning it acts as a good insulator. However, its mechanical resistance still requires improvement.

"The use of paper industry waste could bring about economic and environmental benefits as it means that material considered as waste can be reused as raw material." -- This is one of the conclusions of the study developed by researchers at the Upper Polytechnic School of Linares (University of Jaen), which has been published in the? journal Fuel Processing Technology.

The scientists collected cellulous waste from a paper factory (recycled waste in this case) along with sludge from the purification of its waste water. In their laboratory they then mixed this material with clay used in construction and passed the mixture through a pressure and extrusion machine to obtain bricks.

"Adding waste means that the end product has low thermal conductivity and is therefore a good insulator," explains Carmen Mart?nez, researcher at the University of Jaen. "In addition to the resulting benefit of using these bricks instead of their traditional counterparts made of traditional raw materials."

Another of the advantages of adding waste to the brick prototypes is that they provide energy due to their organic material content. This could help to reduce fuel consumption and kiln time required for brick production.

At the moment the prototype's dimensions are small (3 x 1 x 6 cm). But the team has already tested larger bricks and the results are similar. "On the whole, this technique could bring about a saving in energy and raw materials for brick factories along with environmental benefits from the use of waste that is initially discarded," adds Mart?nez.

The researcher recognises, however, that the 'Achilles heel' of these bricks is their lower mechanical resistance compared to traditional bricks, although this parameter is above the legal minimum. There are still a few problems to solve in the adherence and shaping of those pieces that have high percentages of paper waste.

The team continues in their search for the happy medium between sustainability and material resistance and is still researching the advantages of adding other products, such as sludge from water treatment plants or residues from the beer, olive and biodiesel industries.

Fuel Processing Technology has published another study confirming that biodiesel waste can be used for brick manufacture, thus increasing insulation capacity by 40%.

Share this story on Facebook, Twitter, and Google:

Other social bookmarking and sharing tools:


Story Source:

The above story is reprinted from materials provided by Plataforma SINC, via AlphaGalileo.

Note: Materials may be edited for content and length. For further information, please contact the source cited above.


Journal References:

  1. D. Eliche-Quesada, S. Mart?nez-Mart?nez, L. P?rez-Villarejo, F.J. Iglesias-Godino, C. Mart?nez-Garc?a, F.A. Corpas-Iglesias. Valorization of biodiesel production residues in making porous clay brick. Fuel Processing Technology, 2012; 103: 166 DOI: 10.1016/j.fuproc.2011.11.013
  2. Carmen Mart?nez, Teresa Cotes, Francisco A. Corpas. Recovering wastes from the paper industry: Development of ceramic materials. Fuel Processing Technology, 2012; 103: 117 DOI: 10.1016/j.fuproc.2011.10.017

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

Source: http://feeds.sciencedaily.com/~r/sciencedaily/top_news/top_technology/~3/YYo6LtkKT7k/121219084058.htm

orange bowl tim howard goal ben gibbard nfl playoff schedule tim howard scores nick cannon kidney failure consumer financial protection bureau

No comments:

Post a Comment